WHAT IT DOES
Jigsaws use a small blade that goes back and forth to cut through material. They are good for cutting thinner materials and can produce curves.
ABOUT THIS TOOL
- Corded and connects to standard mains electricity
- Variable speed from trigger
- Fits T shank blades
- Can cut wood max 65mm, plywood max 30mm, plastic max 20mm, alluminium max 15mm and steel max 6mm
- Cable reaches 2.6m
SAFETY & PPE
Mask - ESSENTIAL
Glasses - ESSENTIAL
Ear protection - RECOMMENDED
PPE available at the library for a suggested donation
YOU MAY ALSO NEED
Blades that are specifically for the material you intend to cutLubrication if cutting metal
Extension lead if the cable is too short
HOW TO USE IT
Pull the trigger to power the jigsaw, the harder you pull the trigger the faster the blade will go. Allow the blade to do the work, don't apply much pressure as this could bend the blade and damage the machine. The blade may take a few seconds to completely stop once you let go of the trigger, allow it stop before resting it down and turning it off at the mains. If your wood is burning it the blade may be too hot, it could be that you have been using it for too long or the blade is blunt and needs replacing.
Keep fingers and cord away from the blade.
Instructional video for a similar jigsaw: