Stud Finder Check Availability

WHAT IT DOES

Stud finders are used to search for the reinforced wall under the surface; this device is used to find wooden or metal studs through drywall boards.

ABOUT THIS TOOL

• Alert tone and LED indicator when objects are detected
• Locates wood and metal studs
• Detects AC wires, pipes, joints
• Detecting depth: 19mm
• Position accuracy: 3mm
• Operating temperature: -20C ~400C
  
• Battery: 9V DC
  
• Power consumption: 16mA
• Low-battery indicator

HOW TO USE IT

Determine an area of search (i.e walls), place this instrument in surface area in such a way LED could be seen, press the power button, then the first indicator light and the green light is on, and hear a sound, the red indicator light goes out. Don't release the power button, along with measured surfaced and move around. When red indicator light starts to turn on, it means that the Stud Finder in sensoring a stud, if all red LED lights and sound for 'Didi…', make a mark on the surface area and release the power button. Repeat the action several times on both side of the mark along the surface area, if the alarm and all red LED light repeat.

ensor is