WHAT IT DOES
Angle grinders use a spinning disk that can cut a variety of materials (wood, masonry, tile & metal), remove paint, grind and polish.
ABOUT THIS TOOL
- Compact
- Corded and connects to standard mains electricity
- Cable reaches 4m
- 1150rpm
- Suitable for all standard disks up to 115mm
- Thread of spindle M14
- Specific disk bit - this will guide what you can cut
SAFETY & PPE
Mask (full face visor if working with metal)- ESSENTIAL
Glasses - ESSENTIAL
Ear protection - ESSENTIAL
Gloves & skin covered (if working with metal) - ESSENTIAL
PPE available at the library for a suggested donation
YOU MAY ALSO NEED
Disks that are specific for the material you intend to cutClamps to hold the material
Extension lead if the cable is too short
HOW TO USE IT
Having attached your appropriate disk and secured in place, push the orange switch up to turn the angle grinder on. You will hold the grinder to the material with medium pressure at a specific angle, which angle will depend on the job you are doing. Once you have finished lift your finger from the trigger and allow the disk to fully stop before putting it down.
Keep fingers and cord away from the disk.
Take caution when cutting metal as sparks will fly.
Instructional video for a similar angle grinder:
