| Manufacturer | Dewalt |
| Model | DCG412 |
| Weight | 2.7 |
WHAT IT DOES
Angle grinders use spin disks of different types that can cut a variety of materials (wood, masonry, tile & metal), remove paint, grind and polish.
ABOUT THIS TOOL
- Manual attached
- Battery powered - may need charging
- Comes with charger & disk change key
- Suitable for all standard disks up to 125mm
- Specific disk bit - this will guide what you can cut
SAFETY & PPE
Mask (full face visor if working with metal)- ESSENTIAL
Glasses - ESSENTIAL
Ear protection - ESSENTIAL
Gloves & skin covered (if working with metal) - ESSENTIAL
PPE available at the library for a suggested donation
YOU MAY ALSO NEED
Disks that are specific for the material you intend to cutClamps to hold the material
HOW TO USE IT
Having attached your appropriate disk and handle to the grinder, press the button to turn on. You will hold the grinder to the material with medium pressure at a specific angle, which angle will depend on the job you are doing. Once you have finished push the same button up and allow the disk to fully stop before putting it down.
Keep fingers and cord away from the disk.
Take caution when cutting metal as sparks will fly.
Instructional video for a similar jigsaw:
https://liverpooltoollibrary.org.uk/
1 Aspen Grove
Liverpool, L8 0SR
United Kingdom